наблюдател! спецификация за вариант тип er forskjellige, vennlige se noka på

taker f722bls 60a v2-stack

vlachene

1. използвам ванлига stm32f722 чипет

2. utstyrt med den siste 42688-p жироскоп 

3. 16m черна товарна наличност

4. интегриран lc-филтър

5. oppgradera usb-grensesnittet av тип c

6. direkte ansluten til d ji luftenheten

7. med taker h60_bls 60a 4in1-esc er flygfølelsen silkeslen

8. enkel og rimelig installasjonsmetode, støttedämparen kan gjøre at gyroskopet fungerer veldig stabilt

9. 9v@2.5a + 5v@3a двойно обработено bec

spesifikator

gep-f722-hd v2 контрол на полетите

• mikrokontroler: stm32f722

• imu: icm42688-p(spi)

• anslutning av luftenhet: директно anslutning до d ji-luftenhet

• черна товарна височина: 16 m обхват

• USB-kontakt: type-c

• osd: betaflight osd с чип at7456e

• захранване: 5v@3a, 9v@2.5a двойно захранване

• фърмуер-задача: geprcf722

• størrelser: 36,85×36,85 mm, tykkelse 30,5×30,5 mm, tykkelse φ4 mm eller φ3 mm skjermer for stive sylindere.

• produkt for bruk: 3-6s lipo

• uart:5

• filtre for effekt: интегриран lc-bilde

• Vekt: 8,1 g

taker h60_bls 60a 4-i-1-fjärrkontroll

• produkt for bruk: 3-6s lipo

• галванометър: стод

• непрекъсната струя: 60a

• burststrøm: 65a (5 sekunder)

• степен на протокола: dshot 150/300/600

• skjermer: 42×45,7 mm, tykkelse 30,5×30,5 mm, tykkelse φ4 mm eller φ3 mm skjermer for seksjoner.

• Vekt: 14,9 g

• bilde: b_x_30

vkl.

1 x flygkontroll

1 x esc

1 x кондензатор

1 x адаптерен кабел за xd ji-luftenhet

1 x адаптерен кабел за flygkontroll

1 x xt60 strömkabel

4 x m3*30 скрувар

4 x m3*25 скрувар

8 x nylonmuttrar

8 x silikonhylsor

2 x sh1.0 4-полюсен силиконов кабел

1 x камера за свързване

taker f722bls 65a v2-stack

drag

1. använder det vanliga stm32f722-chippet

2. equipped with the latest 42688-p gyroscope

3. 16m onboard black box storage

4. integrated lc filter

5. upgraded type-c usb interface

6. directly plugs into the d ji air unit

7. paired with the taker h65_8s_bls 65a 4in1 esc, providing a smooth flying experience

8. simple and efficient installation method with shock absorbers for stable gyroscope performance

9. dual independent becs: 9v@2.5a and 5v@3a

specifications

gep-f722-hd v2 flight controller

• mcu: stm32f722

• imu: icm42688-p(spi)

• air unit connection:direct plugging into d ji air unit

• black box: 16m onboard

• usb interface: type-c 

• barometer: supported

• osd: betaflight osd w/ at7456e chip

• bec: 5v@3a,9v@2.5a dual bec

• firmware target: geprcf722

• dimension: 36.85×36.85mm, mounting hole size 30.5×30.5mm，φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.

• input voltage: 3-6s lipo 

• uart: 5

• power filter: integrated lc filter

• weight: 8.1g

taker h65_8s_bls 65a 4in1 esc

• input voltage: 3-8s lipo

• ammeter: supported

• continuous current：65a

• burst current：70a（5 seconds）

• support protocol: dshot 150/300/600

• dimension：42×45.7mm,mounting hole size30.5×30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.

• weight: 14.9g

• firmware target: b_x_30

includes

1 x fc board

1 x esc board

1 x capacitor

1 x d ji air unit adapter cable

1 x flight controller adapter cable

1 x xt60 power cable

4 x m3*30 screws

4 x m3*25 screws

8 x nylon nuts

8 x silicone anti-shake pads

2 x sh1.0 4pin silicone cable

1 x camera connection cable


 

taker f722bls 80a v2 stack

features

1.  use mainstream stm32f722 chip

2.  equipped with the latest 42688-p gyroscope 

3.  16m black box storage

4.  integrated lc filter

5.  upgrade type-c usb interface

6.  directly plugged into the d ji air unit

7.  with taker h80_bls 80a 4in1 esc, dual mos, high current, silky flight

8.  simple and reasonable installation method, the shock absorber can make the gyroscope work very stably

9.  9v@2.5a + 5v@3a dual independent bec

specifications

gep-f722-hd v2 flight controller

•  mcu:stm32f722

•  imu:icm42688-p(spi)

•  air unit connection:direct plugging into d ji air unit

•  black box:16m onboard

• usb interface:type-c 

• barometer: support

• osd:betaflight osd w/ at7456e chip

• bec:5v@3a,9v@2.5a dual bec

• firmware target:geprcf722

• size:36.85×36.85mm, hole 30.5×30.5mm,φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.

• input voltage:3-6s lipo 

• uart:5

• power filter:integrated lc filter

• weight:8.1g

taker h80_bls 80a 4in1 esc

•  input voltage: 3-6s lipo

•  ammeter: support

•  continue current:80a

•  burst current:85a(5 second)

•  support protocol: dshot 150/300/600

•  size:56.3*61.1mm,hole30.5×30.5mm,φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.

•  weight: 28.1g

• target: b_x_30

includes

1 x flight controller

1 x esc

1 x capacitor

1 x d ji air unit adapter cable

1 x flight controller adapter cable

1 x xt60 power cable

4 x m3*30 screws

4 x m3*25 screws

8 x nylon nuts

8 x silicone grommets

2 x sh1.0 4pinsilicone cable

1 x camera connection cable